Precise drain throttle for heavily polluted waste water. The IDM flow measurement for full filling is the central element of the almost self-cleaning, remotely operated and highly precise pneumatic discharge control PNA. The reliable and never-tiring flap with pneumatic drive and the pinch valve react quickly to changing flows and conditions.
Ultrasonic transit time difference flow measurement for wastewater, raw wastewater and rainwater
Highly precise flow value acquisition. The LDM is a calibrated measuring device for backflow-free flow measurement of waste water in open channels or open channels. 10 flow velocity measuring sections distributed over the entire cross section provide most accurate flow values when the sensor is partially or fully filled. The level measurement is integrated in the device housing.
Flow measurement and discharge control for wastewater, raw wastewater and rainwater in partially and fully filled pipes.
Most reliable waste water throttle and discharge control with accurate flow measurement for partial filling and dry installation. The fast, almost self-cleaning and remotely controllable pneumatically driven pinch valve is based on the LDM flow measurement integrated in the system and limits waste water, raw waste water and rainwater quantities to a value that can be set as required.
The reliable discharge control for wastewater and rainwater
Precise and easy to maintain throttle system for stormwater tanks and wastewater structures. The fast, almost self-cleaning and remotely controllable butterfly valve with pneumatic actuator is based on the flow measurement integrated in the system and limits the flow to an arbitrarily adjustable quantity. As long as the maximum flow is not reached, the flap remains open, while the flow measurement system measures precisely even when partially filled.
Temporary use of the proven MID for full filling to collect high-precision measurement data.
Waste water and external water flow measurement Measurements are performed with a high-precision, portable MID flowmeter mechanically protected by a plastic layer, which is normally installed in existing shafts and ducts without structural modifications. A bypass cushion completely seals the channel cross section and guides the entire water quantity completely through the measuring system.